The gasket is the first thing to suspect, not the only thing
When a pressure cooker stops holding pressure, the rubber gasket is the usual suspect, and it is also the cheapest part to rule out. Before you order anything, though, be honest about what you are seeing. A gasket that is worn, stiff or no longer seating properly will let steam escape around the lid. But a lid that is not sitting correctly, a cooker that is overfilled, or a cooker that is simply too small for the job can produce similar symptoms.
The supplied information for the replacement gasket covers what it is and what it fits. It does not include a diagnostic checklist or a set of troubleshooting steps, so treat the guidance below as a way to organize your own inspection rather than a manufacturer procedure.
Confirm the size before anything else
The single most useful fact about this part is the diameter. This replacement rubber gasket is designed for Kuhn Rikon pressure cookers with a diameter of 28 cm, and compatibility is stated for Kuhn Rikon pressure cookers of Ø 28 cm. If your cooker is a different diameter, this is not your part, no matter how similar the leak looks.
Measure the cooker rather than guessing from the model name. If you are unsure which diameter you have, check the base or the lid markings, or compare against the DUROMATIC cookers you own. Getting the diameter right is the whole ballgame here.
What the replacement gasket is
- Junta de goma de olla a presión de · Ø 28 cm: Replacement rubber gasket designed for Kuhn Rikon pressure cookers with a diameter of 28 cm The diameter is the compatibility check that decides whether this part fits your cooker at all.

Junta de goma de olla a presión de · Ø 28 cm - Junta de goma de olla a presión de · Ø 28 cm: Made of durable rubber for a reliable seal The gasket's job is to seal, so a worn or degraded seal is the symptom you are trying to fix.
- Junta de goma de olla a presión de · Ø 28 cm: Easy to install as a direct replacement part This is a swap-in part rather than a modification, which keeps the job simple.
- Junta de goma de olla a presión de · Ø 28 cm: Ideal for maintaining your pressure cooker's functionality Replacing the gasket is a maintenance step, not a repair for a damaged cooker.
Signs that point toward the gasket
These are the observations worth writing down before you shop. None of them is a confirmed diagnosis on its own, but together they build a case.
- Steam escaping around the lid rim: Steam that keeps leaking from the lid area rather than from the valve is the classic gasket symptom. Note where it comes out and whether it happens at the start of cooking or once pressure builds.
- The seal looks tired: Inspect the rubber itself. Cracks, flat spots, a hardened feel or a gasket that no longer sits evenly in its groove all suggest the seal is no longer doing its job. The catalog does not specify a replacement interval, so your own inspection is the guide.
- The lid needs more effort to close: If closing and locking the lid has become harder or feels less positive than before, the gasket is one plausible contributor. Check the lid and handles too before blaming the rubber.
- Pressure takes longer to build or will not hold: A weak seal can make the cooker sluggish. Rule out overfilling and a cooker that is too small for the load before you conclude the gasket is at fault.
What to check before you order
Work through the cheap checks first. Confirm the cooker is Ø 28 cm. Make sure the gasket is seated evenly all the way around and not twisted or pinched. Check that the lid closes and locks cleanly and that the handles are secure. If the leak persists after those checks and the rubber looks worn, a replacement gasket is a sensible next step.
The supplied information does not include care instructions, a recommended replacement schedule, or a list of which specific cooker models accept this gasket beyond the Ø 28 cm diameter. If you need model-level confirmation, check your cooker's documentation before ordering.
Replacing the gasket
The catalog describes this as a direct replacement part that is easy to install. Beyond that, the supplied information does not include step-by-step fitting instructions, so follow the guidance that came with your cooker.
- Remove the old gasket: Take the worn gasket out of its groove and set it aside so you can compare it with the new one.
- Fit the new gasket: Seat the replacement in the groove, checking that it sits evenly with no twists or pinches.
- Close and test: Close and lock the lid, then bring the cooker up to pressure and watch for steam escaping around the rim.
When replacing the gasket is not the answer
If you have fitted a new Ø 28 cm gasket and steam still escapes, the gasket was not the problem. Look at the lid, the handles and how the cooker is being loaded. A cooker that is overfilled, or one being used beyond what it is designed for, can behave like a failed seal.
Also be realistic about what a gasket can fix. It restores the seal. It does not repair a damaged lid, a bent body or a faulty valve. If the symptoms point there, a gasket will not solve them, and the DUROMATIC spare parts you need will be different ones.

